Reasons Why Your Concrete Foundation Cracks

Most of the time, concrete foundation cracks appear at weak points like pipe areas, walls, basement window frames, and corners. It’s essential to pay attention to such cracks and try to observe whether they are becoming bigger. Moreover, it’s crucial to know why the crack emerged in the first place and what is the underlying reason behind these foundation cracks. If you want to find out the major causes of cracks in your foundation, keep on reading below: 

Plumbing leaks 

It’s vital to ensure that your pipes are not leaking and are secured and that you do not have any plumbing leaks on your property. When your home is not fortified with a sump pump or a basement waterproofing, the excess water will add to the soil, which causes it to enlarge and thrust against your foundation.  


Once an earthquake happens, the ground normally shakes. During this time, your home is also shaken around. Fortunately, other places don’t experience earthquakes too often. Although even the smallest of quivers can be a problem. Keep in mind that when the foundation isn’t stable or supported, it could shift around, crack, and weaken. Though a minimal earthquake might not result in new cracks, it can intensify those that are already existing.  

Too much moisture or drought 

Once moisture is eliminated from the soil, the soil shrinks as well. Once this takes place, it pulls your home away from the foundation, making a gap. This gap then enables the foundation to move. Once the home’s foundation isn’t properly backed up, there’s a tendency that it’ll move around and eventually forms a few cracks. On the other hand, when excessive moisture is present, it can make the soil that supports your home’s foundation expand.  


Whether you experience a typical rainstorm or a hurricane, such storms can give off plenty of water. As a result, the foundation of your house can get compromised. Excessive water will force the soil around your home’s foundation to expand, which will thrust against the house and eventually cause cracks to happen on your concrete foundation. Moreover, storms can lead to different structural issues as well especially when you do not do any preventive measures to make your house more secure.  

During the winter season, the freeze and thaw cycle is one of the major reasons why foundation cracks are found in concretes. The concrete commonly starts to freeze approximately 18° C and then melts at nearly 35°. After this, cracking starts to form and emerge.  


It doesn’t matter if the flooding comes from inadequate drainage, a leak, from a storm, or something else, excessive water will be a major issue for the foundation of your concrete. Once there is too much hydrostatic pressure, your home’s foundation will begin to observe more cracks, more leaks, and more issues to deal with. When this happens, it’s only reasonable to contact the experts and ask for foundation repair Springfield MO services to make sure that everything will be restored and be more fortified against any issues in the future. 

How to Effectively Maintain Asphalt Paving?

Recognized for its durability and strength, asphalt is the most well-used option when it comes to paving driveways and roads. But roads are susceptible to degradation because of several reasons. Heavy traffic, ineffective drainage system, harsh weather conditions, and temperature can cause asphalt to create potholes and cracks, which degrades the road over time. While asphalt is recognized for enduring heavy load and harsh temperatures, improper maintenance might minimize its lifespan. Thus, regular asphalt road maintenance is important to get the perks of its enduring nature. In this article, we will be providing you a few tips on how you can maintain your asphalt paving Nashville effectively.  

Repair drainage issues 

Your asphalt paving can be damaged due to a poor drainage system. As a result, this may require you to get heavy asphalt replacement or repair. A poor drainage system enables water to infiltrate the base surface and eventually weaken it, forming potholes and cracks. Repairing such drainage issues by setting up underdrain or drain inlet may help. A decent drainage system guarantees you to have a long-lasting asphalt paving.  

Sealcoating and crack filling 

When your asphalt paving has cracks on it, expect water to weaken the road as they run through the cracks. Apart from that, heavy vehicle loads can cause the cracks to widen as well. Fortunately, this issue can be resolved by crack filling. You can either do this job yourself or you can also choose to employ an expert especially when the damage is extreme. Moreover, having your asphalt surface seal coated every few years can aid in boosting its lifespan. Plus, it keeps the surface from water seepage and harmful elements.  

Regular checkup 

Though asphalts can endure heavy traffic, a load of traffic can still cause your asphalt pavement to deteriorate especially you fail to maintain it properly. The best way is to minimize the heavy vehicle loads, such as delivery and garbage trucks on your driveway. Although, that’s not always the case. So, having your asphalt paving inspected regularly is one of the ideal ways to prolong its lifespan. A regular inspection enables timely repair and detection of any harm caused to the roads. To get regular repair and inspection, know that you can employ asphalt maintenance service from asphalt contractors near you. 

Ice and snow removal 

During the winter season, the thaw-freeze cycle can cause your asphalt road to crack. The accumulated water under the surface due to the freeze-thaw cycle mixed with the high temperatures and weight of traffic can minimize the quality of the pavement. Hence, regular ice and snow removal is an important requirement for keeping up asphalt roads. Though you can’t shovel snow regularly, you have to use an expert ice and snow removal service to get quality results.  


Aside from damage maintenance and inspection, cleaning your asphalt paving regularly can also help keep up your asphalt road. If you fail to regularly clean it, there’s a possibility that it may amass within cracks and leads to extreme damage. So, it’s best to clean it regularly to keep up its durability.  

Solutions for Foundation Repair

Different solutions for foundation repair, like underpinning stabilize substructures, can solve all kinds of your foundation issues. There are many ways you can underpin foundations and several ways of repair to be utilized by the experts as well. When you need foundation underpinning services, then don’t hesitate to contact the best foundation repair Lexington KY company right away that can do an excellent job at doing this foundation repair task using standard techniques. Since underpinning systems is quite common, here are some of them that can be effective when used in foundation repairs.  

Poured concrete piers 

These piers are installed by excavating approximately 10 ft. deep hole and then setting up string rebar at the hole’s bottom. After that is over, contractors will pour concrete into the void. They can be a good technique used for underpinning, however, they also share some disadvantages when used.  

Helical steel piers 

These are basically utilized for repairing foundations that are a viable answer and not very heavy. This includes particular beam and pier substructures and concrete slabs. Helical steel piers are rotated and spiraled into the ground to achieve approximately 15-18 inches deep. Material costs are usually extremely high on these kinds of pilings. However, such a process can be the answer to your problems with your foundation.  

Pressed steel pilings 

These pilings are usually utilized for underpinning foundations. Pressed steel pilings are the ideal solution to any slab complications you experience. They are utilized for foundation repair since they are very sturdy. With this method, these pilings are typically installed to a depth of 20 to 22 ft. However, they could be drilled down as further as 70 ft. They are a good answer to any issue you may be having. Pressed steel pilings are driven all the way down until they attain bedrock. This technique guarantees that they won’t shift, providing a good resolution.  

Pressed concrete piers 

These are structural supports are piled one above the other as part of the process of underpinning. Approximately, pressed concrete piers are 10 inches deep and 6 inches in diameter. Generally, they are installed about 10 to 12 inches into the ground. Since they are concrete, these must be cured. This system is one way that can be used to resolve foundation issues.  

Belled concrete pilings  

This type of piling is quite the same as concrete piers. However, they have more bell-shaped than the latter. They also share issues. Other foundation companies call them “bell-bottom piers.” As they use this underpinning method, belled concrete pilings are piled one on top of the other, pretty similar to basic pressed concrete pilings.  

Soil injection 

This method uses soluble materials. Approximately, these are injected 7 to 10” into the soil beneath your structure. The catch here is that soil injection is to utilize such chemicals to keep the soil from creating drawbacks, swelling, and absorbing moisture. Once the soil expands, it may crack and compromise your foundation, causing a few concerns.